Additional information
Weight | 8 lbs |
---|---|
Dimensions | 7 × 5 × 5 in |
$48.00
This is a replacement mounting bracket for the Wraptor 1K/3K/4K/6K Awning.
In stock
Weight | 8 lbs |
---|---|
Dimensions | 7 × 5 × 5 in |
This is a complete outer wall set for the Wraptor 6K. It includes 3 large panels that cover all of the outer-facing portions of the awning. The walls are attached to the awning and are draped outward and staked. This provides a huge amount of interior usable space. The panels attach to the top of the awning with a large velcro strip and to the the side of another panel with velcro as well. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The first panel has a door, and you can unzip each panel and roll them up for additional ventilation. The zippers are along the red vertical trim.
This is a replacement end arm for the Wraptor 4K/6K Awning.
$50 Gift certificate good towards anything we sell on our site!
This is a complete wall set for the Wraptor 2000. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. The walls can be attached between the support poles of the Wraptor to provide a complete enclosure around two sides of your vehicle. Each outer panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
Rain Gutter slides into the rear sail channel of our awning. has velcro to attach to the vehicle side on opposite end.
Measure 50″ wide by 12″ long.
These are our newest Gen4 units. Just as our other products have continued to evolve the Ultra Privy is no exception. Based on customer feedback we’ve improved the hinge setup on this version as well as other minor improvements. The Overland Pros Ultra Privy Shower Room is the newest addition to our product line. It can be deployed in seconds by one person. It provides the ultimate in trail shower, changing room or bathroom setup. The hinges lock into place for a secure feeling that you’re room won’t fold on you while you’re using it. It has a velcro strap to secure your shower head, a window to access items in your vehicle without leaving the room, and a durable cover for all weather use. When deployed it is 42″ wide by 40″ deep so you won’t feel cramped! Our new V4 (updated from V3) has bars on all 4 sides of the top as well as the bottom to keep a nice square shape!
The Overland Pros Wraptor 2000 vehicle mounted Awning is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 270 degrees of shade around your vehicle. Included are 4 structural poles that pivot around your vehicle and connect to height adjustable poles for varied ground. The structural poles between the panels keep the awning taut which some competitor awnings do not provide. The awning structure when deployed does not require guy out lines for initial set-up but definitely required in windy conditions. The awning can be deployed by one person in just a few minutes. The Wraptor 2000 measures 2 meters (79 inches or 6.5 feet) long when stowed on the vehicle. The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. With out current version 2 design you can use the back strap to deploy the awning faster and skip the outer structural poles. They are of course still included if you wish to use them. The version 2 design also incorporates a cover flap over the zipper to keep moisture out better as well as 3 outer buckles to keep it tight on bumpy terrain.
Available individual walls can be attached between the poles to provide a full enclosure or more shade or shelter from the wind. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. Available full Wraptor 2000 wall set is available providing 6 walls to turn the awning into a full enclosure.
Recommended for 2-door vehicles or smaller SUVs.
Be sure to specify drivers vs passenger side mount.
NOTE- if you purchase a Overland Pros roof top tent and and awning at the same time, the awning ships for free.
Anonymous (verified owner) –
Great and fast response to get this out to me.
Ray (verified owner) –
Larry Fulkerson (verified owner) –
Herbert Yun (verified owner) –
Ross Downard (verified owner) –
Scott Y. (verified owner) –
Ordered a wraptor bracket for my 4k. Arrived quickly. Same great quality bracket as expected.
Dale Lomax (verified owner) –
Jose B. (verified owner) –
Very good customer service and products. Very happy with all your products
Daniel Westermeyer (verified owner) –
Very heavy duty bracket. Much sturdier than expected and well constructed. Will be using 3 of them as universal brackets to mount side tarp to jeep Rhino Rack.
Roger Baker (verified owner) –
Solid as hell! Delivery was very fast
Frank Guerrini (verified owner) –
They customer service was excellent