Additional information
Weight | 8 lbs |
---|---|
Dimensions | 7 × 5 × 5 in |
$48.00
This is a replacement mounting bracket for the Wraptor 1K/3K/4K/6K Awning.
In stock
Weight | 8 lbs |
---|---|
Dimensions | 7 × 5 × 5 in |
The Overland Pros Wraptor 2000 vehicle mounted Awning is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 270 degrees of shade around your vehicle. Included are 4 structural poles that pivot around your vehicle and connect to height adjustable poles for varied ground. The structural poles between the panels keep the awning taut which some competitor awnings do not provide. The awning structure when deployed does not require guy out lines for initial set-up but definitely required in windy conditions. The awning can be deployed by one person in just a few minutes. The Wraptor 2000 measures 2 meters (79 inches or 6.5 feet) long when stowed on the vehicle. The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. With out current version 2 design you can use the back strap to deploy the awning faster and skip the outer structural poles. They are of course still included if you wish to use them. The version 2 design also incorporates a cover flap over the zipper to keep moisture out better as well as 3 outer buckles to keep it tight on bumpy terrain.
Available individual walls can be attached between the poles to provide a full enclosure or more shade or shelter from the wind. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. Available full Wraptor 2000 wall set is available providing 6 walls to turn the awning into a full enclosure.
Recommended for 2-door vehicles or smaller SUVs.
Be sure to specify drivers vs passenger side mount.
NOTE- if you purchase a Overland Pros roof top tent and and awning at the same time, the awning ships for free.
This fits the our Roof top tents and all of our awnings. IT hangs from either the tent or awning arm and allows you to better organize your items. Comes with a storage pouch and folds up nice and small!
This is a replacement end arm for the Wraptor 4K/6K Awning.
This is our newest freestanding awning. A 180 degree awning for those that have a rear hatch that gets in the way or doesn’t want the wrap around features of our 4K/6K 270 degree models. Same hinges and arms as our awesome Wraptor 4k and 6k awnings!
The Wraptor 180 is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 180 degrees of shade around your vehicle. It includes height-adjustable support poles that extend to 8′ 6″. They are used when deploying the awning walls during high winds. The awning can be deployed by one person in less than a minute. Available walls can be attached with Velcro (instead of fail-prone zippers) to provide shade or a full set of walls forms a full enclosure with a door. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. The Wraptor 3K is the big brother to the Wraptor 1K. Closed up it is 87″ long. Please make sure to keep the front and rear mounting bracket as close to the hinges as possible.
Offers ~90 sq/ft of coverage
Please be patient while we update our photos. This is a complete wall set for the Wraptor 4K. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. One panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip and to adjacent panels with velcro. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
If you are looking for a compressor to air-up your tires, look no further!
$25 Gift certificate good towards anything we sell on our site!
This is a complete outer wall set for the Wraptor 6K. It includes 3 large panels that cover all of the outer-facing portions of the awning. The walls are attached to the awning and are draped outward and staked. This provides a huge amount of interior usable space. The panels attach to the top of the awning with a large velcro strip and to the the side of another panel with velcro as well. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The first panel has a door, and you can unzip each panel and roll them up for additional ventilation. The zippers are along the red vertical trim.
Anonymous (verified owner) –
Great and fast response to get this out to me.
Ray (verified owner) –
Larry Fulkerson (verified owner) –
Herbert Yun (verified owner) –
Ross Downard (verified owner) –
Scott Y. (verified owner) –
Ordered a wraptor bracket for my 4k. Arrived quickly. Same great quality bracket as expected.
Dale Lomax (verified owner) –
Jose B. (verified owner) –
Very good customer service and products. Very happy with all your products