Additional information
Weight | 5 lbs |
---|---|
Dimensions | 84 × 5 × 5 in |
$80.00
This is a replacement middle arm for the Wraptor 4K/6K Awning.
In stock
Weight | 5 lbs |
---|---|
Dimensions | 84 × 5 × 5 in |
The Overland Pros Wraptor 2000 vehicle mounted Awning is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 270 degrees of shade around your vehicle. Included are 4 structural poles that pivot around your vehicle and connect to height adjustable poles for varied ground. The structural poles between the panels keep the awning taut which some competitor awnings do not provide. The awning structure when deployed does not require guy out lines for initial set-up but definitely required in windy conditions. The awning can be deployed by one person in just a few minutes. The Wraptor 2000 measures 2 meters (79 inches or 6.5 feet) long when stowed on the vehicle. The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. With out current version 2 design you can use the back strap to deploy the awning faster and skip the outer structural poles. They are of course still included if you wish to use them. The version 2 design also incorporates a cover flap over the zipper to keep moisture out better as well as 3 outer buckles to keep it tight on bumpy terrain.
Available individual walls can be attached between the poles to provide a full enclosure or more shade or shelter from the wind. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. Available full Wraptor 2000 wall set is available providing 6 walls to turn the awning into a full enclosure.
Recommended for 2-door vehicles or smaller SUVs.
Be sure to specify drivers vs passenger side mount.
NOTE- if you purchase a Overland Pros roof top tent and and awning at the same time, the awning ships for free.
$25 Gift certificate good towards anything we sell on our site!
American made and engineered locally in California, these brackets allow you to mount our Ultra Privy or other accessorIies(shovel, max trax, etc) directly to our Baja Wedge tent. now you just need to mount the tent to your rig and … Read More
This is a replacement end arm for the Wraptor 4K/6K Awning.
American made and engineered locally in California, these brackets allow you to mount our Wraptor 4k or 6k directly to our Baja Wedge tent. now you just need to mount the tent to your rig and you can attach the … Read More
This is a complete wall set for the Wraptor 2000. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. The walls can be attached between the support poles of the Wraptor to provide a complete enclosure around two sides of your vehicle. Each outer panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
This is our newest FULLY FREESTANDING awning. The successor to our Wraptor 2500, the Wraptor 4K is brand-new fully freestanding 270 degree awning. Most notably it no longer requires support poles! Simply unzip the cover, swing out the arms, and cinch it tight. That’s it!
The Wraptor 4K is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 270 degrees of shade around your vehicle. It includes height-adjustable support poles that extend to 8′ 6″. They are used when deploying the awning walls during high winds. The awning can be deployed by one person in less than a minute. Available walls can be attached to provide shade or a full set of walls forms a full enclosure with a door. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. The Wraptor 4K measures 2.2 meters (86 inches) long when stowed on the vehicle. The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing the arms for full 270 degree coverage. Please make sure to keep the rear mounting bracket as close to the rear hinge as possible.
Available in passenger and driver side mounting.
Offers ~80 sq/ft of coverage
Choosing which side to get- if your vehicle has a swinging rear door then we suggest the side opposite to which it swing. most rear doors swing to the passenger side so for those vehicles we recommend driver side. If you have FJ Cruiser or a van the we recommend passenger side. if your vehicle has a tailgate or lift gate then we recommend passenger side in case you pull over on the side of the road and want to open your awning- this way it won’t open over the street but rather the side of the road
MOUNTING:
Mount one bracket close to the end of the awning near the hinge point. U-bolts included for round bars or bolts directly to roof rack.
Install video from Overland Bound: https://youtu.be/YFqWeHfRKf8
Herbert Yun (verified owner) –