Additional information
Weight | 5 lbs |
---|---|
Dimensions | 84 × 5 × 5 in |
$80.00
This is a replacement middle arm for the Wraptor 4K/6K Awning.
In stock
Weight | 5 lbs |
---|---|
Dimensions | 84 × 5 × 5 in |
Side walls can be attached between the support poles of the Wraptor 2000 270 degree awning to provide protection from the elements. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. Use multiple panels to create a small privacy room by attaching to the velcro on the inner poles. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. This is a single wall. If you want the complete set of walls, please see the Wraptor 2000 Wall Set
Please be patient while we update our photos.
This is a complete outer wall set for the Wraptor 6K. It includes 3 large panels that cover all of the outer-facing portions of the awning. The walls are attached to the awning and are draped outward and staked. This provides a huge amount of interior usable space. The panels attach to the top of the awning with a large velcro strip and to the the side of another panel with velcro as well. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The first panel has a door, and you can unzip each panel and roll them up for additional ventilation. The zippers are along the red vertical trim.
The Overland Pros Wraptor 2000 vehicle mounted Awning is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 270 degrees of shade around your vehicle. Included are 4 structural poles that pivot around your vehicle and connect to height adjustable poles for varied ground. The structural poles between the panels keep the awning taut which some competitor awnings do not provide. The awning structure when deployed does not require guy out lines for initial set-up but definitely required in windy conditions. The awning can be deployed by one person in just a few minutes. The Wraptor 2000 measures 2 meters (79 inches or 6.5 feet) long when stowed on the vehicle. The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. With out current version 2 design you can use the back strap to deploy the awning faster and skip the outer structural poles. They are of course still included if you wish to use them. The version 2 design also incorporates a cover flap over the zipper to keep moisture out better as well as 3 outer buckles to keep it tight on bumpy terrain.
Available individual walls can be attached between the poles to provide a full enclosure or more shade or shelter from the wind. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. Available full Wraptor 2000 wall set is available providing 6 walls to turn the awning into a full enclosure.
Recommended for 2-door vehicles or smaller SUVs.
Be sure to specify drivers vs passenger side mount.
NOTE- if you purchase a Overland Pros roof top tent and and awning at the same time, the awning ships for free.
Please be patient while we update our photos. This is a complete wall set for the Wraptor 4K. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. One panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip and to adjacent panels with velcro. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
If you are looking for a compressor to air-up your tires, look no further!
This 2 in 1 Professional grade heavy duty tire gauge & rapid deflator will allow you to quickly alternate between checking your tire pressure & deflating your tire to a desired PSI as many times as you like without ever having to remove the unit or having to carry 2 units with you to get the job done. Rapid deflation of approx 1Psi a second!
$100 Gift certificate good towards anything we sell on our site!
Herbert Yun (verified owner) –