Additional information
Weight | 5 lbs |
---|---|
Dimensions | 84 × 5 × 5 in |
$80.00
This is a replacement middle arm for the Wraptor 4K/6K Awning.
In stock
Weight | 5 lbs |
---|---|
Dimensions | 84 × 5 × 5 in |
These are our newest Gen4 units. Just as our other products have continued to evolve the Ultra Privy is no exception. Based on customer feedback we’ve improved the hinge setup on this version as well as other minor improvements. The Overland Pros Ultra Privy Shower Room is the newest addition to our product line. It can be deployed in seconds by one person. It provides the ultimate in trail shower, changing room or bathroom setup. The hinges lock into place for a secure feeling that you’re room won’t fold on you while you’re using it. It has a velcro strap to secure your shower head, a window to access items in your vehicle without leaving the room, and a durable cover for all weather use. When deployed it is 42″ wide by 40″ deep so you won’t feel cramped! Our new V4 (updated from V3) has bars on all 4 sides of the top as well as the bottom to keep a nice square shape!
Please be patient while we update our photos. This is a complete wall set for the Wraptor 4K. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. One panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip and to adjacent panels with velcro. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
The Overland Pros Wraptor 2000 vehicle mounted Awning is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 270 degrees of shade around your vehicle. Included are 4 structural poles that pivot around your vehicle and connect to height adjustable poles for varied ground. The structural poles between the panels keep the awning taut which some competitor awnings do not provide. The awning structure when deployed does not require guy out lines for initial set-up but definitely required in windy conditions. The awning can be deployed by one person in just a few minutes. The Wraptor 2000 measures 2 meters (79 inches or 6.5 feet) long when stowed on the vehicle. The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. With out current version 2 design you can use the back strap to deploy the awning faster and skip the outer structural poles. They are of course still included if you wish to use them. The version 2 design also incorporates a cover flap over the zipper to keep moisture out better as well as 3 outer buckles to keep it tight on bumpy terrain.
Available individual walls can be attached between the poles to provide a full enclosure or more shade or shelter from the wind. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. Available full Wraptor 2000 wall set is available providing 6 walls to turn the awning into a full enclosure.
Recommended for 2-door vehicles or smaller SUVs.
Be sure to specify drivers vs passenger side mount.
NOTE- if you purchase a Overland Pros roof top tent and and awning at the same time, the awning ships for free.
Rain Gutter slides into the rear sail channel of our awning. has velcro to attach to the vehicle side on opposite end.
Measure 50″ wide by 12″ long.
Our largest FULLY FREESTANDING awning. The Wraptor 6K provides massive shade – even enough for a Sprinter van. The rear hinge is identical to our Wraptor 4K withan additional hinge with 2 arms at the front of the awning to provide additional coverage in front.
Simply unzip the cover, swing out the arms, and cinch it tight…that’s it!
-Waterproof 280G ripstop canvas
-Height adjustable poles extend to 8′ 6″, required in windy condition
Overland Bound review of the Wraptor 6K: https://youtu.be/VEvzEePiU8A
Install video from Overland Bound: https://youtu.be/YFqWeHfRKf8
Video is for a 4K which is same install but the 6K comes with 3 brackets.
-Waterproof 280G ripstop canvas
-Deploys in less than a minute
-Height adjustable poles extend to 8′ 6″, required in windy conditions
-91 inches long when stowed on the vehicle
-Velcro at edges for attachments to walls
The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. Please make sure to keep the front and rear mounting brackets close to the hinges. This is crucial to provide adequate support for the awning when open.
Available in PASSENGER or DRIVER side.
Offers ~130 sq/ft of coverage
Recommended for full-size 4-door SUVs, vans and trucks.
Choosing which side to get…if your vehicle has a swinging rear door then we suggest the side opposite to which it swings. Most rear doors swing to the passenger side so for those vehicles we recommend driver side. If you have FJ Cruiser or a van the we recommend passenger side. If your vehicle has a tailgate or lift gate then we recommend passenger side in case you pull over on the side of the road and want to open your awning- this way it won’t open over the street but rather the side of the road
MOUNTING:
Mount 2 brackets close to the ends of the awning near the hinge points. U-bolts included for round bars or bolts directly to roof rack.
Measures 88 inches wide between the arms by 81 inches tall.
Fits the Wraptor 4K fully freestanding 270 degree awning as well as the 6K awning.
Side walls can be attached between the support poles of the Wraptor 4K to provide extra protection.
Panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with velcro. You can attach multiple panels to provide a complete enclosure or just a couple to provide additional shade.
We’ve included velcro wraps on the arms to allow wall attachment underneath. 2 or 3 walls can be placed to create a small room underneath.
Made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact.
This is a SINGLE wall.
Complete set of walls, including mesh zippered door, available as Wraptor 4K Wall Set.
When used on a 6K awning, it will fit differently as the 6K awning is not symmetrical like the 4K awning.
American made and engineered locally in California, these brackets allow you to mount our Ultra Privy or other accessorIies(shovel, max trax, etc) directly to our Baja Wedge tent. now you just need to mount the tent to your rig and … Read More
$50 Gift certificate good towards anything we sell on our site!
Herbert Yun (verified owner) –