$529.00
This is a complete outer wall set for the Wraptor 6K. It includes 3 large panels that cover all of the outer-facing portions of the awning. The walls are attached to the awning and are draped outward and staked. This provides a huge amount of interior usable space. The panels attach to the top of the awning with a large velcro strip and to the the side of another panel with velcro as well. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The first panel has a door, and you can unzip each panel and roll them up for additional ventilation. The zippers are along the red vertical trim.
In stock
| Weight | 27 lbs |
|---|---|
| Dimensions | 24 × 17 × 10 in |
Measures 88 inches wide between the arms by 81 inches tall.
Fits the Wraptor 4K fully freestanding 270 degree awning as well as the 6K awning.
Side walls can be attached between the support poles of the Wraptor 4K to provide extra protection.
Panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with velcro. You can attach multiple panels to provide a complete enclosure or just a couple to provide additional shade.
We’ve included velcro wraps on the arms to allow wall attachment underneath. 2 or 3 walls can be placed to create a small room underneath.
Made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact.
This is a SINGLE wall.
Complete set of walls, including mesh zippered door, available as Wraptor 4K Wall Set.
When used on a 6K awning, it will fit differently as the 6K awning is not symmetrical like the 4K awning.
American made and engineered locally in California, these brackets allow you to mount our Ultra Privy or other accessory (shovel, max trax, etc) directly to our Baja Wedge tent. now you just need to mount the tent to your rig … Read More
Please be patient while we update our photos. This is a complete wall set for the Wraptor 4K. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. The walls can be attached between the support poles of the Wraptor to provide a complete enclosure around two sides of your vehicle. One panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
This is a replacement mounting bracket for the Wraptor 4K/6K Awning.
Our largest FULLY FREESTANDING awning. The Wraptor 6K provides massive shade – even enough for a Sprinter van. The rear hinge is identical to our Wraptor 4K withan additional hinge with 2 arms at the front of the awning to provide additional coverage in front.
Simply unzip the cover, swing out the arms, and cinch it tight…that’s it!
-Waterproof 280G ripstop canvas
-Height adjustable poles extend to 8′ 6″, required in windy condition
Overland Bound review of the Wraptor 6K: https://youtu.be/VEvzEePiU8A
Install video from Overland Bound: https://youtu.be/YFqWeHfRKf8
Video is for a 4K which is same install but the 6K comes with 3 brackets.
-Waterproof 280G ripstop canvas
-Deploys in less than a minute
-Height adjustable poles extend to 8′ 6″, required in windy conditions
-91 inches long when stowed on the vehicle
-Velcro at edges for attachments to walls
The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. Please make sure to keep the front and rear mounting brackets close to the hinges. This is crucial to provide adequate support for the awning when open.
Available in PASSENGER or DRIVER side.
Offers ~130 sq/ft of coverage
Recommended for full-size 4-door SUVs, vans and trucks.
Choosing which side to get…if your vehicle has a swinging rear door then we suggest the side opposite to which it swings. Most rear doors swing to the passenger side so for those vehicles we recommend driver side. If you have FJ Cruiser or a van the we recommend passenger side. If your vehicle has a tailgate or lift gate then we recommend passenger side in case you pull over on the side of the road and want to open your awning- this way it won’t open over the street but rather the side of the road
MOUNTING:
Mount 2 brackets close to the ends of the awning near the hinge points. U-bolts included for round bars or bolts directly to roof rack.
This fits the our Roof top tents and all of our awnings. IT hangs from either the tent or awning arm and allows you to better organize your items. Comes with a storage pouch and folds up nice and small!
This is a replacement middle arm for the Wraptor 4K/6K Awning.
American made and engineered locally in California, these brackets allow you to mount our Wraptor 4k or 6k directly to our Baja Wedge tent. now you just need to mount the tent to your rig and you can attach the … Read More
Derek M. (verified owner) –
Happy camper! Nick was the guy on the phone and customer service was first! Rare nowadays. I’d buy again.
Richard Reid (verified owner) –
Daric Morton (verified owner) –
Monty M –
We are really happy we got the wall set! It is well designed and very versatile (can use any 1 of 3 walls individually, roll up the walls, open the door, etc). It provides a TON of covered space. Finally!!!!! We can stay up and hang out with friends even if it’s cold and breezy. Plenty of room inside for a number of people and chairs. In our double cab Tacoma (6ft bed) we can access both the front and rear cab doors plus the back of the truck all while being inside the wall set. I would estimate a total set up time of about 12 minutes including opening the awning and staking out the wall set. It takes about 10 minutes to put it all away. The walls come in separate bags that are labeled (wall #1, 2 or 3). They also come with plenty of stakes and even guy lines if you need them. The quality is great and all of the materials are very durable! The customer service is terrific! Thanks Nick!
David Clemenson (verified owner) –
I havent used the walls yet and will update the review when I do.
Karim Behlok –
It would’ve been nice to have windows in the walls. Maybe in the future?…
James Parker (verified owner) –
Haven’t used the walls yet but if they are as good as the awning then I’m sure they will be perfect.