For a limited time all soft shell tents are 20% off! Wraptor 2000 awnings are 25% off!
Check out the video from Overland Bound for our Wraptor 6K:
Check out the video from Overland Bound for our Wraptor 4K:
We are dealers for Madman Developments. Check out their vehicle monitoring systems HERE.
Check out what Overland Expo! has to say.
We offer Military Discounts! Please contact us for details.
Featured Products
Wraptor 4K- 270 Degree Freestanding Vehicle Mounted Awning – FREE SHIPPING
PRODUCT OVERVIEW
Ships FREE to the lower 48!
This is our newest FULLY FREESTANDING awning. The successor to our Wraptor 2500, the Wraptor 4K is brand-new fully freestanding 270 degree awning. Most notably it no longer requires support poles! Simply unzip the cover, swing out the arms, and cinch it tight. That’s it!
The Wraptor 4K is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 270 degrees of shade around your vehicle. It includes height-adjustable support poles that extend to 8′ 6″. They are used when deploying the awning walls during high winds. The awning can be deployed by one person in less than a minute. Available walls can be attached to provide shade or a full set of walls forms a full enclosure with a door. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. The Wraptor 4K measures 2.2 meters (86 inches) long when stowed on the vehicle. The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing the arms for full 270 degree coverage. Please make sure to keep the rear mounting bracket as close to the rear hinge as possible.
Available in passenger and driver side mounting.
Offers ~80 sq/ft of coverage
Choosing which side to get- if your vehicle has a swinging rear door then we suggest the side opposite to which it swing. most rear doors swing to the passenger side so for those vehicles we recommend driver side. If you have FJ Cruiser or a van the we recommend passenger side. if your vehicle has a tailgate or lift gate then we recommend passenger side in case you pull over on the side of the road and want to open your awning- this way it won’t open over the street but rather the side of the road
MOUNTING:
Mount one bracket close to the end of the awning near the hinge point. U-bolts included for round bars or bolts directly to roof rack.
Install video from Overland Bound: https://youtu.be/YFqWeHfRKf8
Wraptor 3K – 180 Degree Freestanding Vehicle Mounted Awning – FREE SHIPPING
PRODUCT OVERVIEW
Ships FREE to the lower 48!
This is our newest freestanding awning. A 180 degree awning for those that have a rear hatch that gets in the way or doesn’t want the wrap around features of our 4K/6K 270 degree models. Same hinges and arms as our awesome Wraptor 4k and 6k awnings!
The Wraptor 180 is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 180 degrees of shade around your vehicle. It includes height-adjustable support poles that extend to 8′ 6″. They are used when deploying the awning walls during high winds. The awning can be deployed by one person in less than a minute. Available walls can be attached with Velcro (instead of fail-prone zippers) to provide shade or a full set of walls forms a full enclosure with a door. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. The Wraptor 3K is the big brother to the Wraptor 1K. Closed up it is 87″ long. Please make sure to keep the front and rear mounting bracket as close to the hinges as possible.
Offers ~90 sq/ft of coverage
Wraptor 1K – 180 Degree Freestanding Vehicle Mounted Awning – FREE SHIPPING
PRODUCT OVERVIEW
Ships FREE to the lower 48!
This is our newest FULLY FREESTANDING awning. This time its a 180* awning that is designed to fit across the back of truck camper or small trailer! It uses the same hinges and arms as our awesome Wraptor 4k and 6k awnings!
The Wraptor 180 is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 180 degrees of shade around your vehicle. It includes height-adjustable support poles that extend to 8′ 6″. They are used when deploying the awning walls during high winds. The awning can be deployed by one person in less than a minute. Available walls can be attached to provide shade or a full set of walls forms a full enclosure with a door. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. The Wraptor 1K is the little brother to the Wraptor 3K. Closed up it is 59″ (1500mm) long. Please make sure to keep the front and rear mounting bracket as close to the hinges as possible.
Pictures to follow!
Wraptor 6K- 270 Degree Freestanding Vehicle Mounted Awning – FREE SHIPPING
PRODUCT OVERVIEW
SHIPS FREE TO THE 48 CONTIGUOUS STATES!!
Our largest FULLY FREESTANDING awning. The Wraptor 6K provides massive shade – even enough for a Sprinter van. The rear hinge is identical to our Wraptor 4K withan additional hinge with 2 arms at the front of the awning to provide additional coverage in front.
Simply unzip the cover, swing out the arms, and cinch it tight…that’s it!
-Waterproof 280G ripstop canvas
-Height adjustable poles extend to 8′ 6″, required in windy condition
Overland Bound review of the Wraptor 6K: https://youtu.be/VEvzEePiU8A
Install video from Overland Bound: https://youtu.be/YFqWeHfRKf8
Video is for a 4K which is same install but the 6K comes with 3 brackets.
-Waterproof 280G ripstop canvas
-Deploys in less than a minute
-Height adjustable poles extend to 8′ 6″, required in windy conditions
-91 inches long when stowed on the vehicle
-Velcro at edges for attachments to walls
The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. Please make sure to keep the front and rear mounting brackets close to the hinges. This is crucial to provide adequate support for the awning when open.
Available in PASSENGER or DRIVER side.
Offers ~130 sq/ft of coverage
Recommended for full-size 4-door SUVs, vans and trucks.
Choosing which side to get…if your vehicle has a swinging rear door then we suggest the side opposite to which it swings. Most rear doors swing to the passenger side so for those vehicles we recommend driver side. If you have FJ Cruiser or a van the we recommend passenger side. If your vehicle has a tailgate or lift gate then we recommend passenger side in case you pull over on the side of the road and want to open your awning- this way it won’t open over the street but rather the side of the road
MOUNTING:
Mount 2 brackets close to the ends of the awning near the hinge points. U-bolts included for round bars or bolts directly to roof rack.
Ultra Privy Shower Room V4
PRODUCT OVERVIEW
SHIPS FREE TO THE 48 CONTIGUOUS STATES!!
These are our newest Gen4 units. Just as our other products have continued to evolve the Ultra Privy is no exception. Based on customer feedback we’ve improved the hinge setup on this version as well as other minor improvements. The Overland Pros Ultra Privy Shower Room is the newest addition to our product line. It can be deployed in seconds by one person. It provides the ultimate in trail shower, changing room or bathroom setup. The hinges lock into place for a secure feeling that you’re room won’t fold on you while you’re using it. It has a velcro strap to secure your shower head, a window to access items in your vehicle without leaving the room, and a durable cover for all weather use. When deployed it is 42″ wide by 40″ deep so you won’t feel cramped! Our new V4 (updated from V3) has bars on all 4 sides of the top as well as the bottom to keep a nice square shape!
NB Expeditions G.A.R.B. 2.0
PRODUCT OVERVIEW
Introducing the G.A.R.B. 2.0 (Garbage And Recovery Bag)
Previously the bags we personally used were garbage themselves after a year of sun exposure and light use. Replacing them annually was standard practice as was putting them back on when they fell off the vehicle on bumpy roads. After years of searching for a better tire-mounted trash bag we are proud to announce we’ve found one! We love them so much we are now importing them from Canada. These are hand crafted in Canada from trademarked US Made 1000D Cordura to the Nylon webbing, thread and buckles. As with all fabrics that spend most of their life in the sun, we recommend treating it with “303 Aerospace Protectant” to protect it.