Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 84 × 5 × 5 in |
$80.00
This is a replacement end arm for the Wraptor 4K/6K Awning.
In stock
| Weight | 5 lbs |
|---|---|
| Dimensions | 84 × 5 × 5 in |

American made and engineered locally in California, these brackets allow you to mount our Wraptor 4k or 6k directly to our Baja Wedge tent. now you just need to mount the tent to your rig and you can attach the … Read More

Please be patient while we update our photos. This is a complete wall set for the Wraptor 4K. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. One panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip and to adjacent panels with velcro. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.

$25 Gift certificate good towards anything we sell on our site!


Side walls can be attached between the support poles of the Wraptor 2000 270 degree awning to provide protection from the elements. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. Use multiple panels to create a small privacy room by attaching to the velcro on the inner poles. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. This is a single wall. If you want the complete set of walls, please see the Wraptor 2000 Wall Set

Measures 88 inches wide between the arms by 81 inches tall.
Fits the Wraptor 4K fully freestanding 270 degree awning as well as the 6K awning.
Side walls can be attached between the support poles of the Wraptor 4K to provide extra protection.
Panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with velcro. You can attach multiple panels to provide a complete enclosure or just a couple to provide additional shade.
We’ve included velcro wraps on the arms to allow wall attachment underneath. 2 or 3 walls can be placed to create a small room underneath.
Made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact.
This is a SINGLE wall.
Complete set of walls, including mesh zippered door, available as Wraptor 4K Wall Set.
When used on a 6K awning, it will fit differently as the 6K awning is not symmetrical like the 4K awning.


Rain Gutter slides into the rear sail channel of our awning. has velcro to attach to the vehicle side on opposite end.
Measure 50″ wide by 12″ long.
Herbert Yun (verified owner) –
Roger Baker (verified owner) –
Fast shipping. Very impressive from a customer service standpoint and well thought out products.
Frank Guerrini (verified owner) –
Thank you for your prompt service