Additional information
Weight | 5 lbs |
---|---|
Dimensions | 84 × 5 × 5 in |
$80.00
This is a replacement end arm for the Wraptor 4K/6K Awning.
In stock
Weight | 5 lbs |
---|---|
Dimensions | 84 × 5 × 5 in |
The Overland Pros Wraptor 2000 vehicle mounted Awning is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 270 degrees of shade around your vehicle. Included are 4 structural poles that pivot around your vehicle and connect to height adjustable poles for varied ground. The structural poles between the panels keep the awning taut which some competitor awnings do not provide. The awning structure when deployed does not require guy out lines for initial set-up but definitely required in windy conditions. The awning can be deployed by one person in just a few minutes. The Wraptor 2000 measures 2 meters (79 inches or 6.5 feet) long when stowed on the vehicle. The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. With out current version 2 design you can use the back strap to deploy the awning faster and skip the outer structural poles. They are of course still included if you wish to use them. The version 2 design also incorporates a cover flap over the zipper to keep moisture out better as well as 3 outer buckles to keep it tight on bumpy terrain.
Available individual walls can be attached between the poles to provide a full enclosure or more shade or shelter from the wind. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. Available full Wraptor 2000 wall set is available providing 6 walls to turn the awning into a full enclosure.
Recommended for 2-door vehicles or smaller SUVs.
Be sure to specify drivers vs passenger side mount.
NOTE- if you purchase a Overland Pros roof top tent and and awning at the same time, the awning ships for free.
$100 Gift certificate good towards anything we sell on our site!
If you are looking for a compressor to air-up your tires, look no further!
This fits the our Roof top tents and all of our awnings. IT hangs from either the tent or awning arm and allows you to better organize your items. Comes with a storage pouch and folds up nice and small!
This is our newest FULLY FREESTANDING awning. This time its a 180* awning that is designed to fit across the back of truck camper or small trailer! It uses the same hinges and arms as our awesome Wraptor 4k and 6k awnings!
The Wraptor 180 is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 180 degrees of shade around your vehicle. It includes height-adjustable support poles that extend to 8′ 6″. They are used when deploying the awning walls during high winds. The awning can be deployed by one person in less than a minute. Available walls can be attached to provide shade or a full set of walls forms a full enclosure with a door. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. The Wraptor 1K is the little brother to the Wraptor 3K. Closed up it is 59″ (1500mm) long. Please make sure to keep the front and rear mounting bracket as close to the hinges as possible.
Pictures to follow!
This 2 in 1 Professional grade heavy duty tire gauge & rapid deflator will allow you to quickly alternate between checking your tire pressure & deflating your tire to a desired PSI as many times as you like without ever having to remove the unit or having to carry 2 units with you to get the job done. Rapid deflation of approx 1Psi a second!
Measures 88 inches wide between the arms by 81 inches tall.
Fits the Wraptor 4K fully freestanding 270 degree awning as well as the 6K awning.
Side walls can be attached between the support poles of the Wraptor 4K to provide extra protection.
Panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with velcro. You can attach multiple panels to provide a complete enclosure or just a couple to provide additional shade.
We’ve included velcro wraps on the arms to allow wall attachment underneath. 2 or 3 walls can be placed to create a small room underneath.
Made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact.
This is a SINGLE wall.
Complete set of walls, including mesh zippered door, available as Wraptor 4K Wall Set.
When used on a 6K awning, it will fit differently as the 6K awning is not symmetrical like the 4K awning.
Herbert Yun (verified owner) –