Description
FEATURES AND SPECIFICATIONS
- 200 Denier waterproof construction
$79.00
Rain Gutter slides into the rear sail channel of our awning. has velcro to attach to the vehicle side on opposite end.
Measure 50″ wide by 12″ long.
In stock
Weight | 5 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
Please be patient while we update our photos. This is a complete wall set for the Wraptor 4K. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. One panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip and to adjacent panels with velcro. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
This is our newest FULLY FREESTANDING awning. This time its a 180* awning that is designed to fit across the back of truck camper or small trailer! It uses the same hinges and arms as our awesome Wraptor 4k and 6k awnings!
The Wraptor 180 is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 180 degrees of shade around your vehicle. It includes height-adjustable support poles that extend to 8′ 6″. They are used when deploying the awning walls during high winds. The awning can be deployed by one person in less than a minute. Available walls can be attached to provide shade or a full set of walls forms a full enclosure with a door. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. The Wraptor 1K is the little brother to the Wraptor 3K. Closed up it is 59″ (1500mm) long. Please make sure to keep the front and rear mounting bracket as close to the hinges as possible.
Pictures to follow!
This 2 in 1 Professional grade heavy duty tire gauge & rapid deflator will allow you to quickly alternate between checking your tire pressure & deflating your tire to a desired PSI as many times as you like without ever having to remove the unit or having to carry 2 units with you to get the job done. Rapid deflation of approx 1Psi a second!
This is a replacement mounting bracket for the Wraptor 1K/3K/4K/6K Awning.
Side walls can be attached between the support poles of the Wraptor 2000 270 degree awning to provide protection from the elements. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. Use multiple panels to create a small privacy room by attaching to the velcro on the inner poles. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. This is a single wall. If you want the complete set of walls, please see the Wraptor 2000 Wall Set
This is a replacement end arm for the Wraptor 4K/6K Awning.
This is a replacement middle arm for the Wraptor 4K/6K Awning.
Kristen Miller (verified owner) –
I was able to trim the Velcro width to fit the bottom of my tent.