Wraptor 2000 – 270 Degree Vehicle Mounted Awning
CURRENTLY ON SALE
PLEASE make sure to watch the setup video for our current V2 awning before setting it up! Click Here.
The Overland Pros Wraptor 2000 vehicle mounted Awning is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 270 degrees of shade around your vehicle. Included are 4 structural poles that pivot around your vehicle and connect to height adjustable poles for varied ground. The structural poles between the panels keep the awning taut which some competitor awnings do not provide. The awning structure when deployed does not require guy out lines for initial set-up but definitely required in windy conditions. The awning can be deployed by one person in just a few minutes. The Wraptor 2000 measures 2 meters (79 inches or 6.5 feet) long when stowed on the vehicle. The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. With out current version 2 design you can use the back strap to deploy the awning faster and skip the outer structural poles. They are of course still included if you wish to use them. The version 2 design also incorporates a cover flap over the zipper to keep moisture out better as well as 3 outer buckles to keep it tight on bumpy terrain.
Available individual walls can be attached between the poles to provide a full enclosure or more shade or shelter from the wind. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. Available full Wraptor 2000 wall set is available providing 6 walls to turn the awning into a full enclosure.
Recommended for 2-door vehicles or smaller SUVs.
Be sure to specify drivers vs passenger side mount.
NOTE- if you purchase a Overland Pros roof top tent and and awning at the same time, the awning ships for free.
Cold Weather Cover
- Our Cold Weather cover is an excellent choice if you camp in the snow or very cold climates. It adds an extra layer of insulation to the tent as well as keeping the snow off your tent completely. Manufactured from high strength heat and cold resistant material, the cold weather cover will help shield your tent from heavy rain, snow, hale, or whatever other weather conditions you many encounter. You can fold the tent up with the hood intact which will help keep you tent dry on the inside!
- Reflective thermal hood made of 150T Rip stop polyester Oxford with aluminized coating, 2000mm W/P, UV resistant and flame retardant with taped seams. Quality YKK zippers used on doors & vent openings.
- Easy-to-use drawstring closure combined with multiple reinforced bungee attachment points provides a secure connection underneath tent.
Sliding Ladder Extension
- Aluminum sliding ladder can be used on any RTT model. The ladder is 78″ tall but you can also purchase the extension to add an additional 18″. You may need to re-drill the holes for the bracket mounts to set them for the correct width.
Wraptor 2000 Wall Set
This is a complete wall set for the Wraptor 2000. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. The walls can be attached between the support poles of the Wraptor to provide a complete enclosure around two sides of your vehicle. Each outer panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
Wraptor 2000 Walls – Individual
Side walls can be attached between the support poles of the Wraptor 2000 270 degree awning to provide protection from the elements. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. Use multiple panels to create a small privacy room by attaching to the velcro on the inner poles. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. This is a single wall. If you want the complete set of walls, please see the Wraptor 2000 Wall Set