Additional information
Weight | 5 lbs |
---|---|
Dimensions | 84 × 5 × 5 in |
$80.00
This is a replacement middle arm for the Wraptor 4K/6K Awning.
In stock
Weight | 5 lbs |
---|---|
Dimensions | 84 × 5 × 5 in |
Measures 88 inches wide between the arms by 81 inches tall.
Fits the Wraptor 4K fully freestanding 270 degree awning as well as the 6K awning.
Side walls can be attached between the support poles of the Wraptor 4K to provide extra protection.
Panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with velcro. You can attach multiple panels to provide a complete enclosure or just a couple to provide additional shade.
We’ve included velcro wraps on the arms to allow wall attachment underneath. 2 or 3 walls can be placed to create a small room underneath.
Made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact.
This is a SINGLE wall.
Complete set of walls, including mesh zippered door, available as Wraptor 4K Wall Set.
When used on a 6K awning, it will fit differently as the 6K awning is not symmetrical like the 4K awning.
$50 Gift certificate good towards anything we sell on our site!
This is our newest FULLY FREESTANDING awning. This time its a 180* awning that is designed to fit across the back of truck camper or small trailer! It uses the same hinges and arms as our awesome Wraptor 4k and 6k awnings!
The Wraptor 180 is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 180 degrees of shade around your vehicle. It includes height-adjustable support poles that extend to 8′ 6″. They are used when deploying the awning walls during high winds. The awning can be deployed by one person in less than a minute. Available walls can be attached to provide shade or a full set of walls forms a full enclosure with a door. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. The Wraptor 1K is the little brother to the Wraptor 3K. Closed up it is 59″ (1500mm) long. Please make sure to keep the front and rear mounting bracket as close to the hinges as possible.
Pictures to follow!
Side walls can be attached between the support poles of the Wraptor 2000 270 degree awning to provide protection from the elements. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. Use multiple panels to create a small privacy room by attaching to the velcro on the inner poles. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. This is a single wall. If you want the complete set of walls, please see the Wraptor 2000 Wall Set
These are our newest Gen4 units. Just as our other products have continued to evolve the Ultra Privy is no exception. Based on customer feedback we’ve improved the hinge setup on this version as well as other minor improvements. The Overland Pros Ultra Privy Shower Room is the newest addition to our product line. It can be deployed in seconds by one person. It provides the ultimate in trail shower, changing room or bathroom setup. The hinges lock into place for a secure feeling that you’re room won’t fold on you while you’re using it. It has a velcro strap to secure your shower head, a window to access items in your vehicle without leaving the room, and a durable cover for all weather use. When deployed it is 42″ wide by 40″ deep so you won’t feel cramped! Our new V4 (updated from V3) has bars on all 4 sides of the top as well as the bottom to keep a nice square shape!
Our largest FULLY FREESTANDING awning. The Wraptor 6K provides massive shade – even enough for a Sprinter van. The rear hinge is identical to our Wraptor 4K withan additional hinge with 2 arms at the front of the awning to provide additional coverage in front.
Simply unzip the cover, swing out the arms, and cinch it tight…that’s it!
-Waterproof 280G ripstop canvas
-Height adjustable poles extend to 8′ 6″, required in windy condition
Overland Bound review of the Wraptor 6K: https://youtu.be/VEvzEePiU8A
Install video from Overland Bound: https://youtu.be/YFqWeHfRKf8
Video is for a 4K which is same install but the 6K comes with 3 brackets.
-Waterproof 280G ripstop canvas
-Deploys in less than a minute
-Height adjustable poles extend to 8′ 6″, required in windy conditions
-91 inches long when stowed on the vehicle
-Velcro at edges for attachments to walls
The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. Please make sure to keep the front and rear mounting brackets close to the hinges. This is crucial to provide adequate support for the awning when open.
Available in PASSENGER or DRIVER side.
Offers ~130 sq/ft of coverage
Recommended for full-size 4-door SUVs, vans and trucks.
Choosing which side to get…if your vehicle has a swinging rear door then we suggest the side opposite to which it swings. Most rear doors swing to the passenger side so for those vehicles we recommend driver side. If you have FJ Cruiser or a van the we recommend passenger side. If your vehicle has a tailgate or lift gate then we recommend passenger side in case you pull over on the side of the road and want to open your awning- this way it won’t open over the street but rather the side of the road
MOUNTING:
Mount 2 brackets close to the ends of the awning near the hinge points. U-bolts included for round bars or bolts directly to roof rack.
This 2 in 1 Professional grade heavy duty tire gauge & rapid deflator will allow you to quickly alternate between checking your tire pressure & deflating your tire to a desired PSI as many times as you like without ever having to remove the unit or having to carry 2 units with you to get the job done. Rapid deflation of approx 1Psi a second!
This is a complete wall set for the Wraptor 2000. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. The walls can be attached between the support poles of the Wraptor to provide a complete enclosure around two sides of your vehicle. Each outer panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
Herbert Yun (verified owner) –