Description
Replacement cover bag for the Wraptor 4K Awning. Note- This is just the outer PVC cover bag, not the entire awning.
Replacement cover bag for the Wraptor 4K Awning. Note- This is just the outer PVC cover bag, not the entire awning.
Weight | 5 lbs |
---|---|
Dimensions | 19 × 11 × 5 in |
Our largest FULLY FREESTANDING awning. The Wraptor 6K provides massive shade – even enough for a Sprinter van. The rear hinge is identical to our Wraptor 4K withan additional hinge with 2 arms at the front of the awning to provide additional coverage in front.
Simply unzip the cover, swing out the arms, and cinch it tight…that’s it!
-Waterproof 280G ripstop canvas
-Height adjustable poles extend to 8′ 6″, required in windy condition
Overland Bound review of the Wraptor 6K: https://youtu.be/VEvzEePiU8A
Install video from Overland Bound: https://youtu.be/YFqWeHfRKf8
Video is for a 4K which is same install but the 6K comes with 3 brackets.
-Waterproof 280G ripstop canvas
-Deploys in less than a minute
-Height adjustable poles extend to 8′ 6″, required in windy conditions
-91 inches long when stowed on the vehicle
-Velcro at edges for attachments to walls
The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. Please make sure to keep the front and rear mounting brackets close to the hinges. This is crucial to provide adequate support for the awning when open.
Available in PASSENGER or DRIVER side.
Offers ~130 sq/ft of coverage
Recommended for full-size 4-door SUVs, vans and trucks.
Choosing which side to get…if your vehicle has a swinging rear door then we suggest the side opposite to which it swings. Most rear doors swing to the passenger side so for those vehicles we recommend driver side. If you have FJ Cruiser or a van the we recommend passenger side. If your vehicle has a tailgate or lift gate then we recommend passenger side in case you pull over on the side of the road and want to open your awning- this way it won’t open over the street but rather the side of the road
MOUNTING:
Mount 2 brackets close to the ends of the awning near the hinge points. U-bolts included for round bars or bolts directly to roof rack.
Replacement cover bag for the Wraptor 6K Awning. Note- This is just the outer PVC cover bag, not the entire awning.
If you are looking for a compressor to air-up your tires, look no further!
If you are trying to mount your RTT to factory bars or Aero-style bars that are too thick, these longer mounting plates are the trick! They measure 4.25″ center to center. They are made from stainless steel. They use the same nuts and bolts as your original plates.
Replacement Cover and Zipper Gimp for Anza 2000 tents.
Introducing the G.A.R.B. 2.0 (Garbage And Recovery Bag)
Previously the bags we personally used were garbage themselves after a year of sun exposure and light use. Replacing them annually was standard practice as was putting them back on when they fell off the vehicle on bumpy roads. After years of searching for a better tire-mounted trash bag we are proud to announce we’ve found one! We love them so much we are now importing them from Canada. These are hand crafted in Canada from trademarked US Made 1000D Cordura to the Nylon webbing, thread and buckles. As with all fabrics that spend most of their life in the sun, we recommend treating it with “303 Aerospace Protectant” to protect it.
Reviews
There are no reviews yet.