Description
FEATURES AND SPECIFICATIONS
- 200 Denier Canvas
- Mesh pockets
$70.00
This fits the our Roof top tents and all of our awnings. IT hangs from either the tent or awning arm and allows you to better organize your items. Comes with a storage pouch and folds up nice and small!
In stock
Weight | 5 lbs |
---|---|
Dimensions | 7 × 5 × 5 in |
American made and engineered locally in California, these brackets allow you to mount our Ultra Privy or other accessorIies(shovel, max trax, etc) directly to our Baja Wedge tent. now you just need to mount the tent to your rig and … Read More
This is a replacement end arm for the Wraptor 4K/6K Awning.
If you are looking for a compressor to air-up your tires, look no further!
This is our newest FULLY FREESTANDING awning. This time its a 180* awning that is designed to fit across the back of truck camper or small trailer! It uses the same hinges and arms as our awesome Wraptor 4k and 6k awnings!
The Wraptor 180 is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 180 degrees of shade around your vehicle. It includes height-adjustable support poles that extend to 8′ 6″. They are used when deploying the awning walls during high winds. The awning can be deployed by one person in less than a minute. Available walls can be attached to provide shade or a full set of walls forms a full enclosure with a door. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. The Wraptor 1K is the little brother to the Wraptor 3K. Closed up it is 59″ (1500mm) long. Please make sure to keep the front and rear mounting bracket as close to the hinges as possible.
Pictures to follow!
Our largest FULLY FREESTANDING awning. The Wraptor 6K provides massive shade – even enough for a Sprinter van. The rear hinge is identical to our Wraptor 4K withan additional hinge with 2 arms at the front of the awning to provide additional coverage in front.
Simply unzip the cover, swing out the arms, and cinch it tight…that’s it!
-Waterproof 280G ripstop canvas
-Height adjustable poles extend to 8′ 6″, required in windy condition
Overland Bound review of the Wraptor 6K: https://youtu.be/VEvzEePiU8A
Install video from Overland Bound: https://youtu.be/YFqWeHfRKf8
Video is for a 4K which is same install but the 6K comes with 3 brackets.
-Waterproof 280G ripstop canvas
-Deploys in less than a minute
-Height adjustable poles extend to 8′ 6″, required in windy conditions
-91 inches long when stowed on the vehicle
-Velcro at edges for attachments to walls
The awning will need to be mounted with the rear extending beyond the back of the vehicle to allow the awning to swing to 90 degrees for full 270 degree coverage. Please make sure to keep the front and rear mounting brackets close to the hinges. This is crucial to provide adequate support for the awning when open.
Available in PASSENGER or DRIVER side.
Offers ~130 sq/ft of coverage
Recommended for full-size 4-door SUVs, vans and trucks.
Choosing which side to get…if your vehicle has a swinging rear door then we suggest the side opposite to which it swings. Most rear doors swing to the passenger side so for those vehicles we recommend driver side. If you have FJ Cruiser or a van the we recommend passenger side. If your vehicle has a tailgate or lift gate then we recommend passenger side in case you pull over on the side of the road and want to open your awning- this way it won’t open over the street but rather the side of the road
MOUNTING:
Mount 2 brackets close to the ends of the awning near the hinge points. U-bolts included for round bars or bolts directly to roof rack.
This is a complete wall set for the Wraptor 2000. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. The walls can be attached between the support poles of the Wraptor to provide a complete enclosure around two sides of your vehicle. Each outer panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
This is our newest freestanding awning. A 180 degree awning for those that have a rear hatch that gets in the way or doesn’t want the wrap around features of our 4K/6K 270 degree models. Same hinges and arms as our awesome Wraptor 4k and 6k awnings!
The Wraptor 180 is constructed of waterproof 280G ripstop canvas. It quickly expands to give you 180 degrees of shade around your vehicle. It includes height-adjustable support poles that extend to 8′ 6″. They are used when deploying the awning walls during high winds. The awning can be deployed by one person in less than a minute. Available walls can be attached with Velcro (instead of fail-prone zippers) to provide shade or a full set of walls forms a full enclosure with a door. The optional walls are made from lightweight waterproof 200D polyester and are available to purchase separately. The Wraptor 3K is the big brother to the Wraptor 1K. Closed up it is 87″ long. Please make sure to keep the front and rear mounting bracket as close to the hinges as possible.
Offers ~90 sq/ft of coverage
Derek M. (verified owner) –
Happy camper! Nick was the guy on the phone and customer service was first! Rare nowadays. I’d buy again.
Connor (verified owner) –
Great construction, exactly as advertised!