Additional information
Weight | 8 lbs |
---|---|
Dimensions | 7 × 5 × 5 in |
$48.00
This is a replacement mounting bracket for the Wraptor 1K/3K/4K/6K Awning.
In stock
Weight | 8 lbs |
---|---|
Dimensions | 7 × 5 × 5 in |
Measures 88 inches wide between the arms by 81 inches tall.
Fits the Wraptor 4K fully freestanding 270 degree awning as well as the 6K awning.
Side walls can be attached between the support poles of the Wraptor 4K to provide extra protection.
Panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with velcro. You can attach multiple panels to provide a complete enclosure or just a couple to provide additional shade.
We’ve included velcro wraps on the arms to allow wall attachment underneath. 2 or 3 walls can be placed to create a small room underneath.
Made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact.
This is a SINGLE wall.
Complete set of walls, including mesh zippered door, available as Wraptor 4K Wall Set.
When used on a 6K awning, it will fit differently as the 6K awning is not symmetrical like the 4K awning.
This is a replacement end arm for the Wraptor 4K/6K Awning.
$25 Gift certificate good towards anything we sell on our site!
If you are looking for a compressor to air-up your tires, look no further!
This is a complete wall set for the Wraptor 2000. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. The walls can be attached between the support poles of the Wraptor to provide a complete enclosure around two sides of your vehicle. Each outer panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
This is a complete outer wall set for the Wraptor 6K. It includes 3 large panels that cover all of the outer-facing portions of the awning. The walls are attached to the awning and are draped outward and staked. This provides a huge amount of interior usable space. The panels attach to the top of the awning with a large velcro strip and to the the side of another panel with velcro as well. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The first panel has a door, and you can unzip each panel and roll them up for additional ventilation. The zippers are along the red vertical trim.
Please be patient while we update our photos.
Anonymous (verified owner) –
Great and fast response to get this out to me.
Ray (verified owner) –
Larry Fulkerson (verified owner) –
Herbert Yun (verified owner) –
Ross Downard (verified owner) –
Scott Y. (verified owner) –
Ordered a wraptor bracket for my 4k. Arrived quickly. Same great quality bracket as expected.
Dale Lomax (verified owner) –
Jose B. (verified owner) –
Very good customer service and products. Very happy with all your products