Wraptor 1K/3K/4K/6K Mounting Bracket
PRODUCT OVERVIEW
This is a replacement mounting bracket for the Wraptor 1K/3K/4K/6K Awning.
Wraptor 4K/6K Baja Wedge Mounting Bracket
American made and engineered locally in California, these brackets allow you to mount our Wraptor 4k or 6k directly to our Baja Wedge tent. now you just need to mount the tent to your rig and you can attach the … Read More
Wraptor 4K/6K Replacement End Arm
PRODUCT OVERVIEW
This is a replacement end arm for the Wraptor 4K/6K Awning.
Wraptor 4K/6K Replacement Middle Arm
PRODUCT OVERVIEW
This is a replacement middle arm for the Wraptor 4K/6K Awning.
Sliding Ladder Extension
PRODUCT OVERVIEW
- Aluminum sliding ladder can be used on any RTT model. The ladder is 78″ tall but you can also purchase the extension to add an additional 18″. You may need to re-drill the holes for the bracket mounts to set them for the correct width.
Wraptor 2000 Wall Set
PRODUCT OVERVIEW
This is a complete wall set for the Wraptor 2000. It includes all 6 sides- the 4 outer sides plus the 2 walls that run along the side and back of the vehicle. The walls can be attached between the support poles of the Wraptor to provide a complete enclosure around two sides of your vehicle. Each outer panel has a separate door and mosquito mesh to allow for cooling and entry. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. You can attach all panels to provide a complete enclosure or just a couple to provide additional shade. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. The panels fully enclose the awning.
Wraptor 2000 Walls – Individual
PRODUCT OVERVIEW
Side walls can be attached between the support poles of the Wraptor 2000 270 degree awning to provide protection from the elements. The panels attach to the top of the awning with a large velcro strip, attach to the poles with clips and to the the side of another panel with zippers. Use multiple panels to create a small privacy room by attaching to the velcro on the inner poles. The panels are made from the same waterproof 200D polyester as the rain fly on our roof top and ground tents. We chose the lighter material over the 280G awning material to save on weight and make packing the panels more compact. This is a single wall. If you want the complete set of walls, please see the Wraptor 2000 Wall Set
RTT Mounting Hardware
PRODUCT OVERVIEW
This is a replacement set of mounting hardware used on all our RTT’s.
Wraptor to Ground Tent Bridge
PRODUCT OVERVIEW
This allows you to connect our Panamint 2000 and 2500 series ground tents to our Wraptor 2000 and 2500 series 270* awnings. The zippered side connects to the gimp on the Panamint tent. The velcro side connects to the Wraptor awning.